CIR Series 1 Roller Shutter
The CIR Series 1 Aluminium shutter has a slimline 44mm, flat slat curtain, manufactured from aluminum extrusion to provide quality, strength with ease of use and aesthetic appeal.
Suitable applications include shopping centres, shop fronts, club and hotel bars, counter tops, kiosks, arcades, serveries, sporting clubs and stadiums, airports, fire reel cupboards, schools and doorways.
The CIR Series 1 Aluminium Shutter can be slotted to provide
ventilation where necessary or remain solid to keep out vermin and debris.
The CIRSeries 1 Aluminium Shutter can be supplied in a vast arrange of sizes and colour finishes to suit all decors.
APPLICATIONS
• Ideal for shopping centres, shop fronts, club and hotel bars, counter tops, kiosks, arcades, serveries, sporting clubs and stadiums, airports, fire reel cupboards, schools and doorways.
• Suitable for openings up to 9 square metres • High level of security
SPECIFICATIONS
TheCIRSeries 1 Aluminium Shutters can be manufactured up to a width of 3.0m or a total of 9 square metres. Larger openings can be fitted with multiple doors with a combination of standard or corner mullions.
CURTAIN
The curtain is constructed using interlocked 42mm x 1.5mm extruded aluminium slats; the design of the slat produces a flat front surface ideal for counter shutter application. The ends of these aluminium sections are fitted with a nylon end clip to ensure quiet and smooth operation
BOTTOM RAIL
The bottom rail is manufactured from an extruded aluminium section 70mm in height and 15mm in width. The locking mechanism for the shutter is concealed in this rail and can be key-operated from both sides.
LOCKING
Is a two way key mortice lock mounted in the centre of the bottom rail, that slides a steel shoot bolt out into the side guides. Standard locking position allows for inside-outside locking. Multiple doors can also be keyed alike.
SIDE GUIDES
Are 37mm deep by 29mm wide extruded aluminium suitable for face fit or through the mouth of the guide if fitted between walls.
MULLIONS
The standard 180 degree mullion is manufactured from an extruded aluminium section 112mm wide x 29mm; a steel shoot bolt secures the mullion into the floor or counter top. Special mullions are also available to suit a variety of degrees and applications.
BRACKETS
Are manufactured from slotted 90mm x 40mm mild galvanized steel.
DRUM
The drum is manufactured using a 150mm diameter tube if manual or if motorised it is a 229mm diameter tube with an internal spring designed to counterbalance the operation of the shutter.
OPERATION
Manual operation, push-up and pull-down with supplied pull stick. Shutters can be electrically motorised with key switch or remote control operation as an optional extra. Optional Battery Backup System available.
FINISH
Clear anodised is the standard, whilst Dulux powder coat range is available as an optional extra.
ARCHITECTURAL SPECIFICATION
For Supply and install of CIR Series 1 Roller Shutter by CIR Doors please contact us on 0892487705 or sales@cirdoors.com.au
WARRANTY A 12 month warranty against defective materials and workmanship applies.
NOTE CIR DOORS HAS A CONTINUOUS PROGRAM OF DEVELOPMENT SIZES OR CONFIGURATION OF PRODUCT MAY CHANGE AT ANY TIME. FOR THE LATEST IN DESIGN AND SPECIFICATION PLEASE CONSULT WITH CIR DOORS BY CALLING US.
